1″ SB36WBAC21-8 / Aluminum
Features
- Long stroke low damping surround
- Vented low compression design
- Resonance and break-up control
- Low resonance frequency
- Prepared for rear mounting
- Long life lead wires
Additional information
| Nominal Impedance | 8 Ω |
|---|---|
| DC resistance | Re 5.8 Ω |
| Voice coil inductance | Le 0.13 mH |
| Effective piston area | Sd 4.2 cm2 |
| Voice coil diameter | 20.4 mm |
| Voice coil height | 5.5 mm |
| Air gap height | 2.0 mm |
| Linear coil travel (p-p) | 3.5 mm |
| Magnetic flux density | 0.85 T |
| Magnet weight | 0.01 kg |
| Net Weight | 0.055 kg |
| Free air resonance | Fs 160 Hz |
| Sensitivity | (2.83 V / 1 m) 75 dB |
| Mechanical Q-factor | Qms 1.75 |
| Electrical Q-factor | Qes 0.92 |
| Total Q-factor | Qts 0.61 |
| Moving mass incl. air | Mms 0.7 g |
| Force factor | Bl 2.1 Tm |
| Equivalent volume | Vas 0.035 liters |
| Compliance | Cms 1.39 mm/N |
| Mechanical loss | Rms 0.4 kg/s |
| Rated power handling | 5 W |
| Note | * IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct, T/S parameters measured on drive units that are broken in. |
Downloads
Be the first to review “1″ SB36WBAC21-8 / Aluminum”
Reviews
There are no reviews yet.