10″ SW26DBAC76-3-DV / Aluminum
Features
- Unique patented long through shallow design
- Vented cast aluminum chassis for optimum strength and low compression
- Dual rigid aluminum cone structure
- Non-conducting fiber glass coil former for minimum damping
- Shorting ring in motor system for reduced distortion
- Copper voice coil for improved power handling
- Dual voice coil
- Long life insulated silver lead wires
- Powerful neodymium motor system
Additional information
Nominal Impedance | 2 x 3 Ω |
---|---|
DC resistance | Re 2 x 2.4 Ω |
Effective piston area | Sd 312 cm2 |
Voice coil diameter | 75.5 mm |
Voice coil height | 30 mm |
Air gap height | 6 mm |
Linear coil travel (p-p) | 24 mm |
Magnetic flux density | 1.0 T |
Magnet weight | 281 g |
Net Weight | 3.43 kg |
Free air resonance | Fs 19.5 Hz |
Sensitivity | (2.83V/1m) 88/82 dB |
Mechanical Q-factor | Qms 5.96 |
Electrical Q-factor | Qes 0.29 |
Total Q-factor | Qts 0.28 |
Moving mass incl. air | Mms 185 g |
Force factor | Bl (par./ser.) 9.7/19.4 Tm |
Equivalent volume | Vas 49.7 ltr. |
Compliance | Cms 0.36 mm/N |
Mechanical loss | Rms 3.8 kg/s |
Rated power handling | 300 W |
Note | IEC 268-5, T/S parameters measured on drive units that are broken in. |
Reviews
There are no reviews yet.