10″ SW26DBAC76-4 / Aluminum
Features
- Unique patented long through shallow design
- Vented cast aluminum chassis for optimum strength and low compression
- Dual rigid aluminum cone structure
- Non-conducting fiber glass coil former for minimum damping
- Shorting ring in motor system for reduced distortion
- 3 copper voice coil for improved power handling
- Long life insulated silver lead wires
- Powerful neodymium motor system
Additional information
Nominal Impedance | 4 Ω |
---|---|
DC resistance | Re 3.2 Ω |
Effective piston area | Sd 312 cm2 |
Voice coil diameter | 75.5 mm |
Voice coil height | 30 mm |
Air gap height | 6 mm |
Linear coil travel (p-p) | 24 mm |
Magnetic flux density | 1.0 T |
Magnet weight | 281 g |
Net Weight | 3.43 kg |
Free air resonance | Fs 22 Hz |
Sensitivity | (2.83V/1m) 86 dB |
Mechanical Q-factor | Qms 4.5 |
Electrical Q-factor | Qes 0.51 |
Total Q-factor | Qts 0.46 |
Moving mass incl. air | Mms 134 g |
Force factor | Bl 10.8 Tm |
Equivalent volume | Vas 54 liters |
Compliance | Cms 0.39 mm/N |
Mechanical loss | Rms 4.1 kg/s |
Rated power handling | 200 W |
Note | IEC 268-5, T/S parameters measured on drive units that are broken in. |
Reviews
There are no reviews yet.