6″ SB16PFCR25-8 / Paper
Features
- Vented reinforced plastic chassis
- Proprietary cone material with natural fibers made in-house
- Soft low damping rubber surround for improved transient response
- Optimized motor system
- Vented coil former for low compression
- Non-resonant long life lead wires
Additional information
Nominal Impedance | 8 Ω |
---|---|
DC resistance | Re 5.6 Ω |
Voice coil inductance | Le 0.77 mH |
Effective piston area | Sd 124 cm2 |
Voice coil diameter | 25.4 mm |
Voice coil height | 14 mm |
Air gap height | 5 mm |
Linear coil travel (p-p) | 9 mm |
Magnetic flux density | 1.07 T |
Magnet weight | 0.36 kg |
Net Weight | 0.94 kg |
Free air resonance | Fs 38 Hz |
Sensitivity | (2.83 V / 1 m) 87 dB |
Mechanical Q-factor | Qms 2.5 |
Electrical Q-factor | Qes 0.48 |
Total Q-factor | Qts 0.40 |
Moving mass incl. air | Mms 13.8 g |
Force factor | Bl 6.2 Tm |
Equivalent volume | VAS 27 liters |
Compliance | Cms 1.25 mm/N |
Mechanical loss | Rms 1.4 kg/s |
Rated power handling | * 40 W |
Note | * IEC 268-5, T/S parameters measured on drive units that are broken in. |
Reviews
There are no reviews yet.