6″ SB17CAC35-4 / Ceramic
Features
- Vented cast aluminium chassis for optimum strength and low compression
- Geometrically reinforced ceramic cone for optimum piston operation and reduced break-up.
- Soft low damping rubber surround for improved transient response
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
Additional information
| Nominal Impedance | 4 Ω |
|---|---|
| DC resistance | Re 3.1 Ω |
| Voice coil inductance | Le 0.13 mH |
| Effective piston area | Sd 118 cm2 |
| Voice coil diameter | 35.5 mm |
| Voice coil height | 16 mm |
| Air gap height | 5 mm |
| Linear coil travel (p-p) | 11 mm |
| Magnetic flux density | 1.0 T |
| Magnet weight | 0.54 kg |
| Net Weight | 1.56 kg |
| Free air resonance | Fs 29.5 Hz |
| Sensitivity | (2.83 V / 1 m) 90 dB |
| Mechanical Q-factor | Qms 4.70 |
| Electrical Q-factor | Qes 0.31 |
| Total Q-factor | Qts 0.29 |
| Moving mass incl. air | Mms 15.2 g |
| Force factor | Bl 5.3 Tm |
| Equivalent volume | VAS 37.8 liters |
| Compliance | Cms 1.91 mm/N |
| Mechanical loss | Rms 0.6 kg/s |
| Rated power handling | * 60 W |
| Note | * IEC 268-5, T/S parameters measured on drive units that are broken in. |
Downloads
Be the first to review “6″ SB17CAC35-4 / Ceramic”
Reviews
There are no reviews yet.