6″ SB17CRC35-4 / Carbon
Features
- Rohacell®/Carbon fibre sandwich cone for optimized stiffness/damping ratio
- Vented cast aluminum chassis for optimum strength and low compression
- Low damping rubber surround for improved transient response
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and low distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires
- Vented pole piece for reduced compression
Additional information
Nominal Impedance | 4 Ω |
---|---|
DC resistance | Re 3.1 Ω |
Voice coil inductance | Le 0.13 mH |
Effective piston area | Sd 118 cm2 |
Voice coil diameter | 35.5 mm |
Voice coil height | 16 mm |
Air gap height | 5 mm |
Linear coil travel (p-p) | 11 mm |
Magnetic flux density | 1.0 T |
Magnet weight | 0.54 kg |
Net Weight | 1.56 kg |
Free air resonance | Fs 31.5 Hz |
Sensitivity | (2.83 V / 1 m) 90 dB |
Mechanical Q-factor | Qms 4.32 |
Electrical Q-factor | Qes 0.35 |
Total Q-factor | Qts 0.32 |
Moving mass incl. air | Mms 14.2 g |
Force factor | Bl 5.0 Tm |
Equivalent volume | VAS 35.5 liters |
Compliance | Cms 1.80 mm/N |
Mechanical loss | Rms 0.65 kg/s |
Rated power handling | * 60 W |
Note | * IEC 268-5, T/S parameters measured on drive units that are broken in. |
Reviews
There are no reviews yet.