Satori TW29R-B / Fabric
Features
- Non-resonant diaphragm design for minimum high frequency break-up
- Two part aluminium black faceplate with integrated mechanical decoupling
- Dual balanced compression chambers for improved dynamics
- Dual copper caps for absolute minimum voice coil inductance and minimum phase shift
- Saturation controlled motor system with T-shaped pole piece for lower distortion
- Non-reflective cast alumimium chamber with optimized damping for improved dynamics
- Flow optimized vented pole piece for optimum coupling to rear chamber
- CCAW voice coil for low moving mass
- Long life silver lead wires
- Low resonance frequency for extended range
Additional information
Nominal Impedance | 4 Ω |
---|---|
DC resistance | Re 3.0 Ω |
Voice coil inductance | Le 0.02 mH |
Effective piston area | Sd 9.6 cm2 |
Voice coil diameter | 29.0 mm |
Voice coil height | 2.0 mm |
Air gap height | 2.5 mm |
Linear coil travel (p-p) | 0.5 mm |
Moving mass incl. air | Mms 0.44 g |
Free air resonance | Fs 600 Hz |
Sensitivity | (2.83 V / 1 m) 92 dB |
Mechanical Q-factor | Qms 2.0 |
Electrical Q-factor | Qes 1.24 |
Total Q-factor | Qts 0.77 |
Force factor | Bl 2.0 Tm |
Rated power handling | 80 W |
Magnetic flux density | 1.0 T |
Magnet weight | 0.22 kg |
Net Weight | 0.53 kg |
Note | * IEC 268-5, high-pass Butterworth, 2600 Hz, 12 dB/oct. |